Skip to content


Tech Support To Configure Your Cisco Router

Tech Support To Configure Your Cisco Router

Wireless routers become more popular that forward data packets along the network by using the best path. In other words, network routers are communication devices which connect networks to each other like connect a small business network to a big set of networks through the Internet. But, it is essential to go with a comprehensive router only. Cisco router is one of the best routers that is simple to setup. Cisco router comes with IPv6 capability and can reduce electric bills.

Basically, Cisco plays a major role in the networking equipment market for long years. The Cisco router has a great position for its reliable performance and comparably easy to manage and configure! Used Cisco router are available at affordable prices, make them better options for small organizations. If you configure your Cisco router first time, that may be little bit difficult. Thus, there is a helpful guide which will help to configure your Cisco router.

Connect Router with the Network

Firstly, you have to connect the router to your PC carefully via blue serial cable that came with the router packet. After that, simply connect the RJ45 end to your router console port and DB9 end to your system serial port. The serial end contains a 9-pin D-shell connector and jack looks like a big telephone jack. You have to make sure that both ends are connected securely.

Setup a Terminal Session

Start your PC and then run a terminal emulator like PuTTY or HyperTerminal. Now, you need to set the terminal emulator session settings to 9600 baud, 8 data bits, 1 stop bit, and no parity bit. At that point, plug in the router to a power source for booting your router device. While the router boots, you will see the Cisco boot messages, simply check out your terminal emulator settings and just begin the new session. You have to click Return when you will see the message to get started. Press Yes to enter the initial configuration dialog and again Yes to enter basic management setup. It will start the real configuration method.

Set the Hostname and Passwords

Open the hostname prompt, type a hostname to identify your router. After that, select and enter an enable secret at the prompt and hit the Enter key. Now, select and enter an enable password at the next prompt and click Enter. Go to the SNMP prompt, write yes and hit Enter key to facilitate Simple Network Management Protocol. Now, enter a community string for SNMP for network management and tap Enter. Ensure to write all the passwords for future use.

Configure an Interface

After setting the community string, choose the Fast Ethernet interface that you wish to configure. Next, write the text as you see in the list and click Enter. You have to accept all the defaults until get the prompt for an IP address. The subnet mask and IP address are set by using the network administrator; therefore you can obtain these before proceeding. Once the information is entered, the router displays the current configuration information and asks to save the set up data to non-volatile RAM, or exit. Select the option to save and exit.

Save and Reload the New Configuration

After saving and loading the new configuration, you have to press Enter to return the router to its command prompt. Once all the configuration information is entered, you have to connect the device to your network and have the amazing performance of Cisco Router.

If you are facing any complication while configure your router then you need to take help from Cisco Router Tech Support . The skilled experts are capable to resolve all your technical issues and help to configure your Cisco router in least possible time. You can take 24/7 technical assistance over the phone call or instant chat. Please subscribe our newsletter for more details and regular updates.